Soloshot Canon Camera Controller driver for Windows 7 - Soloshot Canon Camera Controller driver from Solo

Soloshot Canon Camera Controller 041615

Soloshot Canon Camera Controller driver from Soloshot for OS Independent

Soloshot Canon Camera Controller driver from Soloshot for OS Independent

Publisher review for Soloshot Canon Camera Controller 041615:

Before install Soloshot Canon Camera Controller 041615you should set a system restore point, to make sure you can rollback to your original driver in case you accidentally install another driver or select the driver for another version of the operating system.

Also, do not forget to check with our site as often as possible for new version of Soloshot Canon Camera Controller . We recommend to always use most recent version of a driver.

NOTE:- for Canon - All Models w- LANC-Port
Installation Steps:Step 1 | Jumpdrive 2.0
You need a USB 2.0 Jumpdrive to update firmware. Make sure USB:
- Has NO files on it.
- Jump drive must be formatted to FAT or FAT32.

Step 2 | Zip File
Download the zip file containing firmware

Step 3 | Unzip
Locate downloaded file and unzip to reveal firmware folder

Step 4 | Copy Files
Open folder and copy files from the firmware folder DIRECTLY to the USB 2.0 Jumpdrive.
Important: Do not copy the folder onto your Jumpdrive.

Step 5 | Dock Controller
While holding down the update button on top of Camera Controller, dock into Accessory Port on Base at 45-degree angle.
Push the controller flush to the Base until it clicks into place.

Step 5 | Controller Updates
Camera Controller LED will flash RED/GREEN during update.
LED 6 on Base will flash RED/GREEN as Controller updates.

Step 7 | Controller Updated
Camera Controller LED will turn RED when update complete.
On the Base:
- LED 1 will be blinking.
- LED 2 and 3 will be solid.

Step 8 | Release Controller
Slide the dock button down to release Camera Controller.
Remove jumpdrive from side of Base.

Operating system:
OS Independent